Heat Treat Cycles: Difference between revisions
No edit summary |
No edit summary |
||
| Line 25: | Line 25: | ||
Stress relief after work hardening or after machining, up to 1" section thickness - Used on OCS Sleeves | Stress relief after work hardening or after machining, up to 1" section thickness - Used on OCS Sleeves | ||
<span style="color:red;">===ES-202 - Controlled Stress Relief Procedure - Being Tested</nowiki> ===</span> | |||
Stress relief after work hardening or after machining, over 1" section thickness - Used on large buttons | Stress relief after work hardening or after machining, over 1" section thickness - Used on large buttons | ||
Revision as of 11:46, 27 September 2023
ES Cycles
ES-140 - Quench & Anneal Process
Not currently in use
ES-150 - Spheroidize Anneal Process
Used to spheroidize anneal swage sockets
ES-160 - Controlled Anneal Process
Not in use anymore - Used to anneal Flemish Eye Sleeves before sub-zero cycle
ES-170 - Controlled Quench & Anneal Process
Not in use anymore - Used to quench & anneal Flemish Eye Sleeves before sub-zero cycle
ES-180 - Sub-Zero Quench & Sub-Critical Spheroidize Anneal
Used for Flemish Eye Sleeves, OCS Sleeves, large buttons, & Twist-On Buttons
ES-190 - Sub-Critical Spheroidize Anneal ("Sub-Zero" Process)
Used to anneal after work hardening or after machining - Used on Flemish Eye Sleeves, OCS Sleeves, & large buttons over 5/8" wall thickness or 1" wire rope size
ES-200 - Supplemental Annealing
Used to anneal after work hardening or after machining - Used on OCS Sleeves & large buttons
ES-201 - Controlled Stress Relief Procedure
Stress relief after work hardening or after machining, up to 1" section thickness - Used on OCS Sleeves
===ES-202 - Controlled Stress Relief Procedure - Being Tested</nowiki> === Stress relief after work hardening or after machining, over 1" section thickness - Used on large buttons