Heat Treat Cycles: Difference between revisions
Jump to navigation
Jump to search
(Created page with "Heat Treat") |
No edit summary |
||
| Line 1: | Line 1: | ||
== ES Cycles == | |||
=== ES-140 - Quench & Anneal Process === | |||
Not currently in use | |||
=== ES-150 - Spheroidize Anneal Process === | |||
Used to spheroidize anneal swage sockets | |||
=== ES-160 - Controlled Anneal Process === | |||
Not in use anymore - Used to anneal Flemish Eye Sleeves before sub-zero cycle | |||
=== ES-170 - Controlled Quench & Anneal Process === | |||
Not in use anymore - Used to quench & anneal Flemish Eye Sleeves before sub-zero cycle | |||
=== ES-180 - Sub-Zero Quench & Sub-Critical Spheroidize Anneal === | |||
Used for Flemish Eye Sleeves, OCS Sleeves, large buttons, & Twist-On Buttons | |||
=== ES-190 - Sub-Critical Spheroidize Anneal ("Sub-Zero" Process) === | |||
Used to anneal after work hardening or after machining | |||
Revision as of 11:38, 27 September 2023
ES Cycles
ES-140 - Quench & Anneal Process
Not currently in use
ES-150 - Spheroidize Anneal Process
Used to spheroidize anneal swage sockets
ES-160 - Controlled Anneal Process
Not in use anymore - Used to anneal Flemish Eye Sleeves before sub-zero cycle
ES-170 - Controlled Quench & Anneal Process
Not in use anymore - Used to quench & anneal Flemish Eye Sleeves before sub-zero cycle
ES-180 - Sub-Zero Quench & Sub-Critical Spheroidize Anneal
Used for Flemish Eye Sleeves, OCS Sleeves, large buttons, & Twist-On Buttons
ES-190 - Sub-Critical Spheroidize Anneal ("Sub-Zero" Process)
Used to anneal after work hardening or after machining