Heat Treat Cycles

ES Cycles

ES-140 - Quench & Anneal Process

Not currently in use

ES-150 - Spheroidize Anneal Process

Used to spheroidize anneal swage sockets

ES-160 - Controlled Anneal Process

Not in use anymore - Used to anneal Flemish Eye Sleeves before sub-zero cycle

ES-170 - Controlled Quench & Anneal Process

Not in use anymore - Used to quench & anneal Flemish Eye Sleeves before sub-zero cycle

ES-180 - Sub-Zero Quench & Sub-Critical Spheroidize Anneal

Used for Flemish Eye Sleeves, OCS Sleeves, large buttons, & Twist-On Buttons

ES-190 - Sub-Critical Spheroidize Anneal ("Sub-Zero" Process)

Used to anneal after work hardening or after machining - Used on Flemish Eye Sleeves, OCS Sleeves, & large buttons over 5/8" wall thickness or 1" wire rope size

ES-200 - Supplemental Annealing

Used to anneal after work hardening or after machining - Used on OCS Sleeves & large buttons

ES-201 - Controlled Stress Relief Procedure

Stress relief after work hardening or after machining, up to 1" section thickness - Used on OCS Sleeves

ES-202 - Controlled Stress Relief Procedure - Being Tested

Stress relief after work hardening or after machining, over 1" section thickness - Used on large buttons