Muncy Specifications

Muncy has standard specifications for a variety of product types.

For general casting information, refer to the Castings page.

Muncy Specifications

100 Series Specifications - Customer-Specific

Spec 100 - Customer Specific Requirements

Spec 100-1 - Seamless Tubing, Cold Drawn

Specifies Muncy's minimum requirements for seamless, cold drawn tubing.

Spec 100-1a - Steel Bar, Hot Rolled

Specifies Muncy's minimum requirements for hot rolled steel bars

1000 Series Specifications - Forgings

Spec 1000 - Forging Requirements - Fittings and Hardware

Specifies Muncy's minimum requirements for forged fittings and hardware

2000 Series Specifications - Castings

Spec 2000 - Metal Casting - Structural, Clevis, and Bale

Specifies Muncy's minimum requirements for structural, clevis, and bail castings. This includes the following standard product lines:

• Open & Closed Spelter Sockets
• Open & Closed Swage Sockets
• Open Boom Pendant Thimbles
• Tow Line Mooring Sockets
• Bridge Bowl Sockets
• Anchor Sockets
• Trailer Rope Sockets

Spec 2001 - Casting Requirements - Hooks

Specifies Muncy's minimum requirements for hook castings. This includes the following standard product lines:

• Pipe Hooks
• Roll Off Hooks
• Sliding Choker Hooks
• Web Sling Sliding Choker Hooks

Spec 2002 - Casting Requirements - Thimbles

Specifies Muncy's minimum requirements for thimble castings. This includes the following standard product lines:

• Bronze Rope Thimbles
• Casing Thimbles
• Closed Boom Pendant Thimbles
• Combination Clamp & Thimbles
• Crescent Thimbles
• Equalizing Thimbles
• Hawser Thimbles
• Slip-On Thimbles
• Slip Through Thimbles
• Towing Thimbles
• DIN Thimbles

Spec 2003 - Casting Requirements - Rigging Hardware and Components - Draft

Specifies Muncy's minimum requirements for rigging hardware and components castings. This includes the following standard product lines:

• Self-Locking Hooks - Bale Type
• Self-Locking Hooks - Shank Type
• Stainless Steel 1pc Duplex Sleeves
• Stainless Steel 2pc Duplex Sleeves
• Stainless Steel Flemish Eye Sleeves (Cast)
• Twist-On Buttons (Carbon Steel Twist-On Drumline & Choker Ferrules)
• Sling Bridles
• Pipe Bridles
• Sling Saddles (Top & Bottom)
• Wedge Button - Wedge Castings

Spec 2004 - Casting Requirements - General Castings - Draft

Specifies Muncy's minimum requirements for castings, if not covered by another specification.

Spec 2005 - Casting Requirements - Mooring Sockets

Specifies Muncy's minimum requirements for towing and mooring castings. This includes the following standard product lines:

• Mooring Sockets

Spec 2006 - Casting Requirements for SK6361 and N5745

Specifies Muncy's minimum requirements for SK6351 & N5745 spelter socket castings.

Spec 2007 - Temporary Pattern Metal Castings - Draft

Specifies Muncy's minimum requirements for rapid prototype castings.